HOT Telecaster A4 Pickups SET Vintage Tele Guitar Classic Nocaster Broadcaster Bridge & Neck Q

For some reason, A4 alloy isn’t commonly used for single coils, even though it can deliver a great mix between A2 and A5 tones, making them highly versatile and balanced across the frequency spectrum. A4 magnets provide a warm and smooth sound, less aggressive than Alnico 5 magnets with a nice balance of clarity and warmth. These pickups are designed to accentuate the midrange frequencies, which makes them ideal for classic rock, blues, and jazz genres. The emphasis on the midrange gives your tone an added sweetness. BRIDGE PICKUP HOT @. 10kOhm with 43AWG pickup wire black vulcanized fiberboard flatwork flat non-staggered Alnico 4 magnets copper plated STEEL baseplate the coil is wrapped with 8-strand WHITE COTTON string wax potted in paraffin and bee`s wax 6-32 x 5/8″ round head mounting screws vintage style pickup tension/height tubing polarity is SOUTH UP / CW winding direction     NECK PICKUP DCR @ 8kOhm with 43AWG wire chrome plated nickel-silver cover vintage specs BLACK flatwork /vulcanized fiberboard sand cast alnico 4 magnets wax potted black and white cloth covered hookup wires polarity is NORTH UP / CCW winding direction (R.W.R.P for hum canceling)IMPORTANT! Tele neck pickups can be mounted with WOOD or PICKGUARD screws. Please let us know if you need the pickguard or wood mounting screws with this pickup. You can send us a message or leave a note on the checkout page.#3 x 1″ Round Head Wood Screws Wood mounting screws are screwed to the body/ wood – under the pickguard – and these require a larger hole in the pickup – so we will re-drill the mounting holes in the pickup to fit the wood screws.#4 – 40UNC Phillips Pan Head Pickguard Screws Pickguard screws are used for mounting the pickup on the pickguard – this way the pickup height can be adjusted without removing the pickguard.