Hot Telecaster® tone by Q pickups Alnico 2/5 TELE NECK Pickup with oversized .250″ magnet rods. A2 is used for high E, B and G strings, A5 is used for low E, A and D strings. Handwound with 43AWG wire @ 11,2kOhm Extra ground wire soldered to the cover Vintage-spec flatwork (black vulcanized fiber) with brass eyelets Cloth covered push-back hookup wire OPEN nickel silver CHROME plated cover Wax Potted North up/CCW Tele neck pickups can be mounted with WOOD or PICKGUARD screws. Please let us know if you need the pickguard or wood mounting screws with this pickup. You can send us a message or leave a note on the checkout page. #3 x 1″ Round Head Wood Screws Wood mounting screws are screwed to the body/ wood under the pickguard. These require a larger screw hole in the bottom pickup flatwork. We can re-drill the mounting holes at request to match the wood screws. #4 – 40UNC Phillips Pan Head Pickguard Screws Pickguard screws are used for mounting the pickup on the pickguard. This way the pickup height can be adjusted without removing the pickguard.
