50s Broadcaster and Nocaster pickups had somewhat unique specs. .195″ diameter Alnico 3 magnets coupled with 43AWG Plain enamel wire resulted in legendary and quite distinctive tone of the early 50s Fender electric guitar. CHROME plated nickel silver cover (NICKEL, GOLD or RAW also available) sand cast 0.195″ diameter Alnico 3 magnets AWG43 PLAIN ENAMEL @ 7.4 kOhm vintage specs BLACK flatwork /vulcanized fiberboard wax potted cloth covered push back hookup wire polarity is NORTH UP / CCW winding direction IMPORTANT! Tele neck pickups can be mounted with WOOD or PICKGUARD screws. Please let us know if you need the pickguard or wood mounting screws with this pickup. You can send us a message or leave a note on the checkout page. #3 x 1″ Round Head Wood Screws – this is the way Fender did it back in the day; Wood mounting screws are screwed to the body/ wood – under the pickguard – and these require a larger hole in the pickup – so we will re-drill the mounting holes in the pickup to fit the wood screws. #4 – 40UNC Phillips Pan Head Pickguard Screws Pickguard screws are used for mounting the pickup on the pickguard – this way the pickup height can be adjusted without removing the pickguard.
