Colour: clear Length: 1.2m Bore as supplied min.: 3.2mm Shrink temperature: 90°C Temperature range : 125°C Radial shrinking ratio: >50% Longitudinal change: <5% Tensile strength: >10.4 MPa Ultimate elongation: >200 % Aging in circulating-air oven: 158.0±1.0°C, 168hrs Tensile strength: >7.3MPa After aging: Ultimate elongation: >100% Volume resistivity: >1014 Ohm.cm Dielectric strength: >15 KV/mm Flammability: VW-1 Concentricity: >65% Heat-shrinkable tubing is universally applied for the insulation of connections or for the end-handling of electric wire, for the insulation of soldered points on resistors and capacitors, for the identification and encapsulation of electric wire, for the corrosion-proofing of metallic rods or tubes and for the protection of antennas. Heat-shrinkable tubes are used for the corrosion-proof and waterproof connection of fibre optic cable. Halogen-free, flexible, flame-retardant heat-shrinkable tubing. Free of Pb,Cd, Hg,Cr 6, PBB and PBDE. Can be used in any enclosed area where a flame-retardant, halogen-free environment is required, such as the uderground, skyscraper, mass transit vehicles and ships. UL recognized at 600V. F mark.
