Firebird pickup – AGED/RELIC with GOLD PLATED cover. This listing is for 1 pickup – available for bridge (7 kOhm), middle (6.74 kOhm) and neck (6.34kOhm). Please leave a note at the checkout page about which position you want. These are probably one of the few vintage correct replica`s of an early 60s Firebird pickup. Everything about these is high quality – built to deliver 1963 Firebird tone. Real vintage Gibson Firebird pickup had a special construction – a set of thin steel plates These hard-to-find plates contribute to the distinctive biting tone of a vintage Firebird guitar. Small plate measures 1″ x 7/32″ (25.4mm x 5.56mm) and it is positioned on the TREBLE side of the pickup, just under the chrome plated nickel silver cover – under the “B” and “G” string – and on top of the bobbins. Larger steel plate is under the bobbins inside the pickup, it measures 1-15/16″ x 7/8″ (49.21mm x 22.23mm) Thickness: 0.015″ – stamped NICKEL SILVER base plates with short legs – GOLD PLATED NICKEL SILVER covers – vintage correct steel plates – vintage reproduction mini humbucker bobbins – sand cast Alnico V magnet bars – maple spacers – single conductor shielded wire with tinned braided copper shield – Elektrisola AWG42 enameled copper wire – coils are wrapped with vintage black paper “flat-back” tape if you need something about these a little different – DC resistance, 4-wire ground, different cover etc – please let us know and we will work it out. Mounting screws and springs are included.
