Cable Length: 3mConnectors: 1x 3.5mm stereo jack male, 2 x XLR male 3.5mm jack adopts gold plated head, metal shell and black baking paint. 3.5mm stereo to dual XLR male audio cable can be used to convert equipment with 3.5mm output interface to power amplifier, active speaker, mixer and other equipment with XLR input interface. The 3.5mm end of the wire is 50cm from the fork, and the length from the Canon end to the fork is 250cm. When connecting a single-channel active monitor speaker, the speakers can be separated by 5 meters The XLR connectors are colored yellow (left channel) and red (right channel) and are separated near the 3.5mm end, approximately 20 inches/50 cm from the separation point. The 3.5mm plug is a standard 3-pole (2 rings and one tip) connector, stereo phone. Not suitable for smartphones with a 4-pole TRRS port. You may need a TRS to TRRS adapter. When changing connections, make sure all devices are powered “off” XLR connector with internal strain relief for rugged reliability, oxygen-free copper (OFC) conductor for enhanced signal clarity, double shielded wire, some noise reduction, anti-interference Heavy-duty gold-plated connectors resist corrosion, provide durability and improve signal transmission, ensuring less signal loss Heavy-duty flexible 5mm diameter (wire outer diameter) rubber sheath, made of environmentally friendly materials, polyethylene insulation to improve high frequency response
